V Cut Groove PCB Separating Separator V-Cut Groove Separator Cutting Machine 40W

Description

V Cut Groove PCB Separating Separator V-Cut Groove Separator Cutting Machine 40W
Description
V-Cut Groove PCB Separating Separator PCB Cutting
Light Bar Sub Board Machine
110V
40W
Specifications
- Voltage:
AC110V
- Power:
40W
-
V-CUT Thickness:
0.6-2.0mm
-
Upper Blade Adjust Range: 0-0.59in
-
Length of Platform: 290mm
- Height of Upper PCB: ≤20mm
- Height of Lower PCB: ≤10mm
- Inner Side of PCB Range: ≤240mm
Instructions
1) Connect the power supply and activate the switch.
2) Adjust the gap between the upper and lower blades.
3) The upper and lower cutters must be on the same plane, and the error cannot exceed 0.1mm.
4) Set the cutting stroke and speed.
How To Adjust The Machine
1. Make sure that the components on the circuit board will not collide with the body and the blade.
2. According to the thickness of the circuit board, adjust the height of the upper blade by adjusting the knob.
Caution
1. Before use, please pay attention to check the tightening of all screws.
2. Do not remove the protective cover around the blade under any circumstances to avoid any danger.
3. This machine is only used for circuit boards with pre-engraved V-cutting, and should not be used for other purposes.
4. After the work is over, please turn off the power and remove the debris.
5. When the machine is not working for a long time, please remove the upper and lower cutters and apply oil to protect the machine. Please wipe before use.
Packing Including
✔ 1*V Cut Groove PCB Separating Separator
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Nov 29, 2023 at 17:57:52 PST, seller added the following information: