2022 New 10 ton Air Cooled Glycol Chiller * DUAL CIRCUIT! * outdoor, Made in USA

Description

** important! please check with us on stock before buying - we always have this model either in production, OR, in stock!
This is one of many units offered by Keith Industrial Group (KIG) in the 2 to 300 ton range.
2022 New, USA made R-Series 10.0 hp / ton Air Cooled Glycol Chiller.
Made in USA
Ideal for brewery, winery, plastics, industrial, lab, manufacturing, plating, etc.
DUAL COPELAND COMPRESSORS & DUAL HEAT EXCHANGERS.  This is a true dual circuit chiller.  There are 2 compressors, each with their own refrigerant circuit and each with their own coil evaporator/exchanger within the chiller's reservoir, and each with their own thermostat control.  You can stage operation as desired, by adjusting setpoint and differential for each circuit.  Chiller can run at 50% capacity with one circuit off, should the need arise.
120,000 BTU/HR heat removal -@ 95F degree ambient,45F degree water out nominal ratings.
Chiller is capable of 25F setpoint operation (use ~ 35% glycol concentration).  Estimated btu’s at 25F:  60,000 BUT/HR
Electrical: 460 / 60HZ / 3 P, 24 volt controls,.  Run Load: 23.6 Amps.  Minimum  Ampacity: 26; Maximum Ampacity: 47.
Upgrade to Digital Temp Control for both compressors.
ETL/CSA Laboratory Approved: ETL # 63122 & CAN/CSA NO. 236
40 gallon, 16 gage, 304 stainless steel closed evaporator tank with coil inside.  Sealed, with high pressure bypass.
Upgrade to 2 HP high head water pump.
Low ambient start-up package – flooded condenser type w receivers.  This is a high end and preferred approach to low ambient operation if you are not familiar with outdoor rated chillers.
R422D Refrigerant.  Refrigerant site glass.  Hi/Lo pressure switches.
Analog water temperature and pressure gauges.
Air-cooled condenser.  Dual fans.
Outdoor rated (OK for indoor operation too).  Low and High Ambient option.
Cabinet: 18 and 20 gage Phos coat galvanized steel finished with polyester powder coat.
Base frame: 1/8 - inch angle & channel iron.
Approximate crated weight: 1000 LBS.
Physical dimensions: 30" wide, 54" long, and 72" tall
Warranty.  1 year parts only warranty on chiller.  5 years on compressor part.
Customer Service:
Keith Industrial Group, Inc. (KIG)
104 Sterling St.
Clinton, MA 01510